XLG Series
25~50W
-
Constant power mode output
-
Wide input range 100~305VAC (Class I)
-
Metal housing design with functional ground
-
Built-in active PFC function,Class 2 power unit
-
Surge protection with 6KV/4KV
-
India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours
-
5 years warranty
-
Multiple models for choice: A-Type: IP67 rated. Io adjustable through built-in potentiometer AB-Type: IP67 rated. Io adjustable through built-in potentiometer & 3 in 1 dimming function.
-
Protections: Over power/Short circuit / Over temperature /Input over voltage (only for India version )
-
IP67 rating for indoor or outdoor installations
Feature
XLG-25
XLG-50
ACL
ACN
FG
INPUT
Vo-
Vo+
OUTPUT
(Non-Dimming Models)
DIM-
DIM+
Vo-
Vo+
(Non-Dimming Models)
OUTPUT
AC input voltage range
100~305VAC; 127~431VDC
AC inrush current (max.)
Cold start, 50A at 230 VAC
Over power protection
Can survive input voltage stress of 440Vac for 48 hours@tc75°C max
Input Over Voltage(for India version)
320 ~ 370VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed)automatically after fault condition is removed)
110-150% Over Power Protection, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is remove
Over temp. protection
500ms, 100ms/115VAC, 230VAC
Setup, rise time
iI/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVA
Withstand voltage
Working temperature
Tcase= -40~+85°C
Tcase= -40~+90°C
Safety standards
L8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC AS/NZS IEC BS EN61347-1, AS/NZS BS EN61347-2-13 independent, BS EN62384;IP67; GB19510.1, GB19510.14, EAC TP TC 004, J61347-1(H29), J61347-2-13(H29), KC61347-1, KC61347-2-13, IS15885(Part2/Sec13)( for XLG-25I/50I type only), NOM-058-SCFI-2017
EMC standards
BS EN55015,BS EN61000-3-2 Class C (@load≧50%) ; BS EN61000-3-3; GB17743, GB17625.1, BS EN61000-4-2,3,4,5,6,8,11; BS EN61547, (surge immunity Line-Earth 6KV, Line-Line 4KV)
Connection
Dimension (LxWxH)(mm)
SJOW 17AWGx3C & H05RN-F 3x1.0mm² (30cm)
Input
A-Type：SJOW 17AWGx2C & H05RN-F 2x1.0mm²(30cm) AB-Type：SJOW 17AWGx2C & H05RN-F 2x1.0mm²(30cm)+UL2517 20AWGx2C(35cm)
Output
105x 63x 30
XLG family selection guide
output
Model
12V
24V
L type
M type
H type
XLG-25
250~1050 mA
530~2100 mA
XLG-50
650~2100 mA
350~1050 mA
3.1A
5A
XLG-75
875~2780 mA
350~1050 m
4A
8A
XLG-100
1400~4100 m
700~2100 mA
350~1050 mA
6.25A
12.5A
XLG-150
1750~5500 mA
350~1050 mA
8.3A
16A
XLG-200
2200~6600 mA
700~2100 mA
350~1050 mA
XLG-240
12V/24V with C.V+C.C mode
XLG-20 is under development
*
Model No
Effi.
Io Ripple
Output
88%
5%(max.)
22~54V, 0.25~1.05A
XLG-25
-
XLG-25 Series
Model No
Effi.
Io Ripple
Output
90%
5%(max.)
22~54V, 0.53~2.1A
XLG-50
-
XLG-50 Series
= Blank,I; Blank: For standard version, I:For India version
= A. AB
Note: Products sourced from the Americas regions may not have the PSE/ CCC/BIS/KC logo. Please contact your MEAN WELL sales for more information
Note
Note
Note
Note
Typo HL
Note
Note
Note
Note
Typo HL
XLG Series
75~150W
-
Full power output at 70~100% Constant power mode operation
-
Wide input range 100~305VAC (Class I)
-
Built-in active PFC function
-
Metal housing design with functional ground
-
Surge protection with 6K V/4K V (10K V/6K V optional)
-
India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours
-
1 years warranty
-
Multiple models for choice: Blank-Type: Io and Vo fixed.(For harsh environment) A-Type: IP67 rated.Io adjustable via built-in potentiometer AB-Type: IP67 rated. Io adjustable through built-in. potentiometer & 3 in 1 dimming function
-
Protections: Over current(for 12,24V)/Over power(for L,M,H-Type) /Over temperature /Short circuit /Input over voltage(for India version)
Feature
XLG-75
XLG-150
ACL
ACN
FG
INPUT
Vo-
Vo+
OUTPUT
(Non-Dimming Models)
DIM-
DIM+
Vo-
Vo+
(Non-Dimming Models)
OUTPUT
AC input voltage range
100~305VAC; 127~431VDC
AC inrush current (max.)
Cold start, 65A at 230VAC
Over current protection (for 12,24V)
95%~ 108% Constant current limiting, recovers automatically after fault condition is removed
110% ~ 150% Hiccup mode,
recovers automatically after fault
condition is removed
Input over voltage (for India version)
Shut down output voltage, re-power on to recover
Over power protection
Safety standards
320~370VAC (Shut down output
voltage , recovers automatically
after fault condition is removed)
EMC standards
BS EN55015,BS EN61000-3-2 Class C (@load≧50%) ; BS EN61000-3-3;BS EN61000-4-2,3,4,5,6,8,11; BS EN61547, (surge immunity Line-Earth 6KV, Line-Line 4KV)(10K/6K option, except for XLG-75)
XLG-100
105% ~ 150% Hiccup mode,
recovers automatically after fault condition is removed
105% ~ 130% Hiccup mode, recovers automatically after fault condition is removed
320~390VAC (Shut down output voltage , recovers automatically after fault condition is removed)
Set up time
500ms/230VAC, 1200ms/115VAC
Withstand voltage
I/P-O/P:4.2KVAC I/P-FG:2.1KVAC O/P-FG:1.5KVAC
Working temperature
Tcase= -40~+90°C
Safety standards
UL8750(type"HL"), UL879(For 12V, 24V), CSA C22.2 No. 250.13-12; ENEC BS EN61347-1, BS EN61347-2-13 independent, BS EN62384; GB19510.1,GB19510.14; IP67，EAC TP TC 004, J61347-1(H29), J61347-2-13(H29), KC61347-1, KC61347-2-13, IS15885(Part2/Sec13)( for XLG-75I/100I/150I type only), NOM-058-SCFI-2017
Connection
AC inrush current (max.)
Input
Output
SJOW 17AWGx3C & H05RN-F 3x1.0mm² (30cm
Blank/A-Type: SJOW 17AWGx2C/14AWGx2C(12V) & H05RN-F 2x1.0mm² (30cm) AB-Type: SJOW 17AWGx2C & H05RN-F 2x1.0mm² (30cm) + UL2517 20AWGx2C(35cm)
Blank/A-Type: SJOW 17AWG/14AWG(for XLG-100-12 and XLG-150-12/24V) x2C & H05RN-F 2x1.0mm²(30cm)
AB-Type: SJOW 17AWGx2C & H05RN-F 2x1.0mm²(30cm)+UL2517 20AWGx2C(35cm)
140x 63x 32
180x 63x 35.5
Model No
Effi.
Io Ripple
Output
89%
---
8.4~12V, 5A
XLG-75
-12
XLG-75 Series
90%
---
16.8~24V, 3.1A
91%
3%
53~107V, 350~1050mA
90%
3%
27~56V, 650~2100mA
XLG-75
-24
XLG-75
-L
XLG-75
-H
Model No
Effi.
Io Ripple
Output
91.5%
---
8.4~12V, 6.5~12.5A
XLG-150
-12
XLG-150 Series
93%
---
16.8~24V, 3.2A~6.25A
93%
3%
120~214V, 350~1050mA
92.5%
3%
60~107V, 700~2100mA
XLG-150
-24
XLG-150
-L
XLG-150
-M
XLG-150
-H
27~56V, 1400~4170mA
4%
92%
Model No
XLG-100
-12
XLG-100
-24
XLG-100
-L
XLG-100
-H
27~56V, 650~2100mA
53~107V, 350~1050mA
Output
16.8~24V, 2~4A
8.4~12V, 4~8A
---
---
3%
3%
91%
92.5%
92%
92%
Effi.
Io Ripple
XLG-100 Series
= Blank,I; Blank: For standard version, I:For India version
= A. AB
Note
Type HL
Note
Note
Note
Note
Type HL
Note
Note
Note
Note
Type HL
Note
Note
Note
XLG Series
200~240W
-
Full power output at 70~100% Constant power mode operation
-
Wide input range 100~305VAC (Class I)
-
Built-in active PFC function
-
Metal housing design with functional ground
-
Surge protection with 6K V/4K V (10K V/6K V optional)
-
India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours
-
1 years warranty
-
Multiple models for choice: Blank-Type: Io and Vo fixed.(For harsh environment) A-Type: IP67 rated.Io adjustable via built-in potentiometer AB-Type: IP67 rated. Io adjustable through built-in. potentiometer & 3 in 1 dimming function
-
Protections: Over current(for 12,24V)/Over power(for L,M,H-Type) /Over temperature /Short circuit /Input over voltage(for India version)
Feature
XLG-200
XLG-240
ACL
ACN
FG
INPUT
Vo-
Vo+
OUTPUT
(Non-Dimming Models)
DIM-
DIM+
Vo-
Vo+
(Non-Dimming Models)
OUTPUT
AC input voltage range
100~305VAC ; 142~431VDC
AC inrush current (max.)
Cold start, 65A at 230VAC
Over current protection (for 12,24V)
95%~ 108% Constant current limiting, recovers automatically after fault condition is removed
105% ~ 130% Hiccup mode, recovers automatically after fault condition is removed
Over power protection (for L,M,H-Type)
Shut down O/P voltage, recovers automatically after temperature goes down
Over power protection
Input over voltage (for India version)
320 ~ 390VAC (Shut down output voltage when the
input voltage exceeds protection voltage)
EMC standards
BS EN55015,BS EN61000-3-2 Class C (@load≧50%) ;BS EN61000-3-3;BS EN61000-4-2,3,4,5,6,8,11; BS EN61547(surge immunity Line-Earth 6KV, Line-Line 4KV)(10K/6KV option);
320 ~ 370VAC (Shut down output voltage when the
input voltage exceeds protection voltage)
Set up time
500ms/230VAC, 1200ms/115VAC
Withstand voltage
i/P-O/P:4.2KVAC I/P-FG:2.1KVAC O/P-FG:1.5KVAC
Working temperature
Tcase= -40~+90°C
Safety standards
UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN61347-1, BS EN61347-2-13 independent, BS EN62384;GB19510.1,GB19510.14; IP67 approved,EAC TP TC 004; J61347-1(H29), J61347-2-13(H29), KC61347-1, KC61347-2-13, IS15885(Part2/Sec13)( for XLG-200 only), NOM-058-SCFI-2017
Connection
AC inrush current (max.)
Input
Output
SJOW 17AWGx3C & H05RN-F 3x1.0mm2 (30cm)
Blank/A-Type: SJOW 17AWGx2C/14AWGx2C(12V) & H05RN-F 2x1.0mm² (30cm) AB-Type: SJOW 17AWGx2C & H05RN-F 2x1.0mm² (30cm) + UL2517 20AWGx2C(35cm)
Blank/A-Type: SJOW 17AWGx2C & H05RN-F 2x1.0mm² for H&M type (30cm);SJOW 14AWGx2C for 12/24V type(30cm);SOOW 17AWGx2C&H07RN-F 2x1.0mm for L type(30cm) AB-Type: SJOW 17AWGx2C & H05RN-F 2x1.0mm² for H&M type / SOOW 17AWGx2C&H07RN-F 2x1.0mm² for L type(30cm) + UL2517 20AWGx2C(35cm)
199x 63x 35.5mm
219x 63x 35.5mm
Model No
Effi.
Io Ripple
Output
92%
---
8.4~12V, 4~8A
XLG-200
-12
XLG-200 Series
94%
---
16.8~24V, 4.15~8.3A
94%
3%
142~285V, 350~1050mA
93%
3%
27~56V, 1750~5500mA
XLG-200
-24
XLG-200
-L
XLG-200
-H
Model No
Effi.
Io Ripple
Output
93%
5%
178~342V, 350~1050mA
XLG-240
-L
XLG-240 Series
92.5%
5%
90~171V, 700~2100mA
91%
5%
7~56V, 2400~6660mA
XLG-240
-M
XLG-240
-H
= Blank,I; Blank: For standard version, I:For India version
= A. AB
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVA
Note
Type HL
Note
Note
Note
Note
Type HL
Note
Note
Note